|
Product Details:
|
| Material: | Aluminium | Core: | Customized |
|---|---|---|---|
| Cable Mark: | Ink Printing Or Embossing Content Customized | Cable Drum Length: | 300~500 Meter Per Drum Or Customized |
| Characted: | Bare Aluminum Conductor | Nominal Area: | 18.4~1439mm² |
| Port Of Shipment: | Qingdao | ||
| High Light: | AAC 1000 AWG Aluminum Bare Conductor,ASTM B 231 Aluminum Bare Conductor,Ink printing Bare Aluminum Conductor |
||
All Aluminum Bare Conductor AAC 1000 AWG Hawkweed (Total Area: 506.7mm2; 37/4.18) Standard ASTM B 231
APPLICATION
Overhead Bare Conductor Wire AAC Cable Aluminum Conductor Wire Power Cable is mainly used as bare overhead transmission cable and as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical teatures exist.
STANDARD
Basic design to BS 215-1/Din 48201/IEC61089/ ASTM B 231 standards.
CONSTRUCTION
AAC cable bvconsists of aluminum wires. The aluminum wires are concentrically stranded.
This section deals with heat-treatable magnesium silicon type aluminium alloys to the applicable International Standard, the electrical and mechanical properties of which all fall within the values suggested by relevant standard. Conductors to all other recognized specifications can also be supplied. The alloys referred to have higher strength but lower conductivity than pure aluminium. Being lighter, alloy conductors can sometimes be used to advantage in place of the more conventional ACSR; Having lower breaking loads than the later, their use becomes particularly favourable when ice and wind loadings are low.
(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.
ELECTRICAL PROPERTIES
| density@20ºC | 2.70 kg/dm |
| Temperature Coefficient@20°C | 0.00360 (°C) |
| resistivity@20°C | 0.0326 Ohms mm2/m |
| linear Expansivity |
23 x10-6 (°C) |
SERVICE CONDITIONS
| Ambient Temperature | -5°C - 50°C |
| Wind Pressure | 80 – 130kg/m |
| Seismic Acceleration | 0.12 - 0.05g |
| Isokeraunic level | 10 – 18 |
| relative Humidity | 5 – 100% |
CONSTRUCTION PARAMETERS
DIN 48201
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product show
Why you choose us?
Contact Person: sales
Tel: +8616638166831
